PTI-Prüfstäube - Normen & Spezifikationen
FAQ
Die spezifische Dichte von ATD liegt bei 2,65
Schüttdichte:
ISO 12103-1, A1 Ultrafine Test Dust – 500 kg/m3
ISO 12103-1, A2 Fine Test Dust – 900 kg/m3
ISO 12103-1, A3 Medium Test Dust – 1025 kg/m3
ISO 12103-1, A4 Coarse Test Dust – 1200 kg/m3
Die spezifische Dichte von ATD liegt bei 2,65
Schüttdichte:
ISO 12103-1, A1 Ultrafine Test Dust – 500 kg/m3
ISO 12103-1, A2 Fine Test Dust – 900 kg/m3
ISO 12103-1, A3 Medium Test Dust – 1025 kg/m3
ISO 12103-1, A4 Coarse Test Dust – 1200 kg/m3
ANSI B93.31
Multipass Method for Evaluating the Filtration Performance of a Fine Hydraulic Fluid Power Element
Contaminants Required: ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete)
Comments & Information: B93.31: Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the ANSI B93.31 & NFPA T3.10.8.8 documents
Multipass Method for Evaluating the Filtration Performance of a Fine Hydraulic Fluid Power Element
Contaminants Required: ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete)
Comments & Information: B93.31: Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the ANSI B93.31 & NFPA T3.10.8.8 documents
ISO 2941
Hydraulic fluid power-filter elements-verification of collapse/burst pressure rating
Contaminants Required: ISO 12103-1, A2 Fine Test Dust and A3 Medium Test Dust
Comments & Information: Test method for element strength & maximum anticipated differential pressure
Hydraulic fluid power-filter elements-verification of collapse/burst pressure rating
Contaminants Required: ISO 12103-1, A2 Fine Test Dust and A3 Medium Test Dust
Comments & Information: Test method for element strength & maximum anticipated differential pressure
ISO 4020
Road Vehicles – Fuel Filters for Diesel Engines
Contaminants Required: ISO 12103-2, M1 and M2 Aluminum Oxide Test Dusts
Comments & Information: An Organic Contaminant is also required, see 4020 standard for details.
Road Vehicles – Fuel Filters for Diesel Engines
Contaminants Required: ISO 12103-2, M1 and M2 Aluminum Oxide Test Dusts
Comments & Information: An Organic Contaminant is also required, see 4020 standard for details.
ISO 4548-4
Initial Particle Retention Efficiency, Life & Cumulative Efficiency (gravimetric method)
Contaminants Required: ISO 12103-1, A2 Fine Test Dust ISO 12103-2, M2, M3, M4 and M5 Aluminum Oxide Test Dust
Comments & Information: Life & Cumulative Efficiency uses A2 Fine Test Dust Initial Particle Retention uses M series of Aluminum Oxide Test Dust
Initial Particle Retention Efficiency, Life & Cumulative Efficiency (gravimetric method)
Contaminants Required: ISO 12103-1, A2 Fine Test Dust ISO 12103-2, M2, M3, M4 and M5 Aluminum Oxide Test Dust
Comments & Information: Life & Cumulative Efficiency uses A2 Fine Test Dust Initial Particle Retention uses M series of Aluminum Oxide Test Dust
ISO 4548-3
Resistance to High Differential Pressure and Elevated Temperature.
Section 10.1: Test for ability to withstand High Differential Pressure
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: Test Method for Element Strength & Maximum Anticipated Differential Pressure (Collapse)
Resistance to High Differential Pressure and Elevated Temperature.
Section 10.1: Test for ability to withstand High Differential Pressure
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: Test Method for Element Strength & Maximum Anticipated Differential Pressure (Collapse)
ISO 4548-12
Filtration Efficiency using Particle Counting, & Contaminant Retention Capacity
Contaminants Required: ISO 12103-1, A3 Medium Test Dust
Comments & Information: SAE J 1858 Oil Filter Multipass Method is cancelled. ISO 4548-12 has been adopted by SAE
Filtration Efficiency using Particle Counting, & Contaminant Retention Capacity
Contaminants Required: ISO 12103-1, A3 Medium Test Dust
Comments & Information: SAE J 1858 Oil Filter Multipass Method is cancelled. ISO 4548-12 has been adopted by SAE
ISO 4572
Hydraulic Fluid Power-Filters – Multipass Method
Contaminants Required: ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per std. is obsolete)
Comments & Information: ISO 4572 Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced 4572
Hydraulic Fluid Power-Filters – Multipass Method
Contaminants Required: ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per std. is obsolete)
Comments & Information: ISO 4572 Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced 4572
ISO 5011
Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors
Contaminants Required: ISO 12103-1, A2 Fine Test Dust and A4 Coarse Dust
Comments & Information: SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE
Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors
Contaminants Required: ISO 12103-1, A2 Fine Test Dust and A4 Coarse Dust
Comments & Information: SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE
ISO/TS 11155-1
Road Vehicles – Air Filters for Passenger Compartments Part 1: Test for Particulate Filtration
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: SAE J 1669-1: Cabin Particulate cancelled. ISO/TS 11155-1 has been adopted by SAE
Road Vehicles – Air Filters for Passenger Compartments Part 1: Test for Particulate Filtration
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: SAE J 1669-1: Cabin Particulate cancelled. ISO/TS 11155-1 has been adopted by SAE
ISO/TS 13353
Diesel Fuel & Petrol Filters for Internal Combustion Engines – Initial Efficiency by Particle Counting
Contaminants Required: ISO 12103-1, A3 Medium Test Dust
Comments & Information: ISO/TS 13353 is cancelled & withdrawn. ISO 19438 has replaced 13353
Diesel Fuel & Petrol Filters for Internal Combustion Engines – Initial Efficiency by Particle Counting
Contaminants Required: ISO 12103-1, A3 Medium Test Dust
Comments & Information: ISO/TS 13353 is cancelled & withdrawn. ISO 19438 has replaced 13353
ISO 16889
Hydraulic Fluid Power Filters – Multipass Method for Evaluating Filtration Performance of a Filter Element.
Contaminants Required: ISO 12103-1, A3 Medium Test Dust
Comments & Information: ISO 16889 has replaced 4572 Hydraulic Filter Multipass Test Method
Hydraulic Fluid Power Filters – Multipass Method for Evaluating Filtration Performance of a Filter Element.
Contaminants Required: ISO 12103-1, A3 Medium Test Dust
Comments & Information: ISO 16889 has replaced 4572 Hydraulic Filter Multipass Test Method
ISO/PWI 23369
Hydraulic Fluid Power – Multipass Method of Evaluating Filtration Performance of a Filter Element under Cyclic Flow Conditions.
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: New Test Method under development by ISO/TC 131/SC6 (BSI)
Hydraulic Fluid Power – Multipass Method of Evaluating Filtration Performance of a Filter Element under Cyclic Flow Conditions.
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: New Test Method under development by ISO/TC 131/SC6 (BSI)
ISO 19438
Diesel Fuel & Petrol Filters for Internal Combustion Engines – Filtration Efficiency using Particle Counting & Contaminant Retention Capacity
Contaminants Required: ISO 12103-1, A3 Medium Test Dust
Comments & Information: ISO 19438 has replaced 13353 Fuel Filter Initial Efficiency
Diesel Fuel & Petrol Filters for Internal Combustion Engines – Filtration Efficiency using Particle Counting & Contaminant Retention Capacity
Contaminants Required: ISO 12103-1, A3 Medium Test Dust
Comments & Information: ISO 19438 has replaced 13353 Fuel Filter Initial Efficiency
ISO/TS 19713-1
Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors -Fractional Efficiency Testing with Fine Particles
Contaminants Required: ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust
Comments & Information: This Standard has been recently published as a TS document by ISO/TC22/SC7/WG3
Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors -Fractional Efficiency Testing with Fine Particles
Contaminants Required: ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust
Comments & Information: This Standard has been recently published as a TS document by ISO/TC22/SC7/WG3
ISO/TS 19713-2
Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors – Fractional Efficiency Testing with Coarse Particles
Contaminants Required: ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust
Comments & Information: This Standard has been recently published as a TS document by ISO/TC22/SC7/WG3
Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors – Fractional Efficiency Testing with Coarse Particles
Contaminants Required: ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust
Comments & Information: This Standard has been recently published as a TS document by ISO/TC22/SC7/WG3
JIS D1608
Fuel Filter Test Method for Automotive Gasoline Engines
Contaminants Required: JIS Z 8901, Class 8 (fine) Test Dust
Comments & Information: ISO 12103-1, A2 Fine Test Dust may be substituted if listed in test report and/or with customer agreement
Fuel Filter Test Method for Automotive Gasoline Engines
Contaminants Required: JIS Z 8901, Class 8 (fine) Test Dust
Comments & Information: ISO 12103-1, A2 Fine Test Dust may be substituted if listed in test report and/or with customer agreement
JIS D1611
Automotive Parts – Test Methods of Lubricating Oil Filters
Contaminants Required: SOFTC-2A
Comments & Information: Gravimetric Test Method
Automotive Parts – Test Methods of Lubricating Oil Filters
Contaminants Required: SOFTC-2A
Comments & Information: Gravimetric Test Method
JIS D1612
Test Methods of Air Cleaners for Automobiles
Contaminants Required: JIS Z 8901 Class 7 (coarse) Test Dust and/or Class 8 (fine) Test Dust
Comments & Information: ISO 12103-1, A4 Coarse Test Dust and/or A2 Fine Test Dust may be substituted if listed in test report and/or with customer agreement
Test Methods of Air Cleaners for Automobiles
Contaminants Required: JIS Z 8901 Class 7 (coarse) Test Dust and/or Class 8 (fine) Test Dust
Comments & Information: ISO 12103-1, A4 Coarse Test Dust and/or A2 Fine Test Dust may be substituted if listed in test report and/or with customer agreement
JIS D1617
Automotive Parts – Fuel Filters for Diesel Engines Test Methods
Contaminants Required: An Organic Contaminant is also required, see D1617 standard for detail. ISO 12103-2 Aluminum Oxide Test Dusts JIS Z 8901 Class 8 (fine) Test Dust
Comments & Information: ISO 12103-1, A2 Fine Test Dust may be substituted for JIS Z 8901 Class 8 Test Dust if listed in test report and/or with customer agreement
Automotive Parts – Fuel Filters for Diesel Engines Test Methods
Contaminants Required: An Organic Contaminant is also required, see D1617 standard for detail. ISO 12103-2 Aluminum Oxide Test Dusts JIS Z 8901 Class 8 (fine) Test Dust
Comments & Information: ISO 12103-1, A2 Fine Test Dust may be substituted for JIS Z 8901 Class 8 Test Dust if listed in test report and/or with customer agreement
NFPA T3.10.8.8
Hydraulic Fluid Power-Filters – Multipass Method for Evaluating Filtration Performance
Contaminants Required: ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete)
Comments & Information: T3.10.8.8 Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the NFPA & ANSI B93.31 documents
Hydraulic Fluid Power-Filters – Multipass Method for Evaluating Filtration Performance
Contaminants Required: ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete)
Comments & Information: T3.10.8.8 Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the NFPA & ANSI B93.31 documents
SAE J 726
Air Cleaner Test Code
Contaminants Required: ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust
Comments & Information: SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE.
Air Cleaner Test Code
Contaminants Required: ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust
Comments & Information: SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE.
SAE HS- 806
Oil Filter Test ProcedureSection 6: Filter Capacity & Contaminant Removal Characteristics of Full-Flow Oil Filters
Contaminants Required: ISO 12103-1, A2 Fine Test Dust SOFTC 2A
Comments & Information: Gravimetric Test Method for Overall Efficiency & Capacity
Oil Filter Test ProcedureSection 6: Filter Capacity & Contaminant Removal Characteristics of Full-Flow Oil Filters
Contaminants Required: ISO 12103-1, A2 Fine Test Dust SOFTC 2A
Comments & Information: Gravimetric Test Method for Overall Efficiency & Capacity
SAE HS- 806
Oil Filter Test Procedure Section 7: Single Pass Particle Retention Capability Test
Contaminants Required: Broad Range within 29-470 µm of glass beads.Narrow Range in 10 µm fractions of glass beads.Natural Contaminant: ISO 12103-1, A4 Coarse Test Dust in full range or fractions thereof.
Comments & Information: Gravimetric Test Method for Single Pass Efficiency
Oil Filter Test Procedure Section 7: Single Pass Particle Retention Capability Test
Contaminants Required: Broad Range within 29-470 µm of glass beads.Narrow Range in 10 µm fractions of glass beads.Natural Contaminant: ISO 12103-1, A4 Coarse Test Dust in full range or fractions thereof.
Comments & Information: Gravimetric Test Method for Single Pass Efficiency
SAE HS- 806
Oil Filter Test Procedure Section 9: Collapse Test for Lube Oil Elements
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: Test method for element strength & maximum anticipated differential pressure.
Oil Filter Test Procedure Section 9: Collapse Test for Lube Oil Elements
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: Test method for element strength & maximum anticipated differential pressure.
SAE J 905.
Fuel Filter Test Methods Section 4: Filter capacity & contaminant removal characteristics
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: Gravimetric Test Method for Efficiency & Capacity
Fuel Filter Test Methods Section 4: Filter capacity & contaminant removal characteristics
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: Gravimetric Test Method for Efficiency & Capacity
SAE J 905
Fuel Filter Test Methods Section 6: Collapse test for fuel filter elements
Contaminants Required: ISO 12103-1, A1, A2, A3, A4 Test Dusts
Comments & Information: Test method for element strength & maximum anticipated differential pressure
Fuel Filter Test Methods Section 6: Collapse test for fuel filter elements
Contaminants Required: ISO 12103-1, A1, A2, A3, A4 Test Dusts
Comments & Information: Test method for element strength & maximum anticipated differential pressure
SAE J 1669-1
Passenger Compartment Air Filter Test Code – Particulate Filtration
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: SAE J 1669-1 is cancelled. ISO 11155-1 has been adopted by SAE
Passenger Compartment Air Filter Test Code – Particulate Filtration
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: SAE J 1669-1 is cancelled. ISO 11155-1 has been adopted by SAE
SAE J 1858
Full-Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance
Contaminants Required: ISO 12103-1, A3 Medium Test Dust
Comments & Information: SAE J 1858 is cancelled. ISO 4548-12 has been adopted by SAE
Full-Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance
Contaminants Required: ISO 12103-1, A3 Medium Test Dust
Comments & Information: SAE J 1858 is cancelled. ISO 4548-12 has been adopted by SAE
SAE J 1985
Fuel Filters – Initial Single Pass Efficiency Test Method
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: Particle Counting Fuel Filter Test Method- Fractional Efficiency
Fuel Filters – Initial Single Pass Efficiency Test Method
Contaminants Required: ISO 12103-1, A2 Fine Test Dust
Comments & Information: Particle Counting Fuel Filter Test Method- Fractional Efficiency
SAE J 2709
Coolant Filter Test Procedure – Section 7: Filter Collapse Test
Contaminants Required: ISO 12103-1, A1, A2, A3, A4 Test Dust
Comments & Information: Test Method for Element Strength & Maximum Anticipated Differential Pressure
Coolant Filter Test Procedure – Section 7: Filter Collapse Test
Contaminants Required: ISO 12103-1, A1, A2, A3, A4 Test Dust
Comments & Information: Test Method for Element Strength & Maximum Anticipated Differential Pressure
SAE J 2793
Fuel dispensing filter test methods
Contaminants Required: ISO 12103-1, Arizona Test Dust A3 Medium Test Dust
Comments & Information: New test method recently published for gasoline and diesel fuel dispensing filters by the SAE Filter Test Methods Committee
Fuel dispensing filter test methods
Contaminants Required: ISO 12103-1, Arizona Test Dust A3 Medium Test Dust
Comments & Information: New test method recently published for gasoline and diesel fuel dispensing filters by the SAE Filter Test Methods Committee